For all those wishing to convert their Blazer front end to the 98+ style:

1. Yes! It can be done.
2. Yes! Kits are made for this conversion.
3. Yes! We do know who has them.

Here are a few examplesfor the98+ conversion kit:

This is my reccomendation:
98+ conversion Kit w/ Extras (http://www.fbirides.com/product.asp?idno=8686)

or you can go this route:
98+ conversion kit (http://www.stylinconcepts.com/part.aspx/partid/474497/partfamilyid/841/subcategoryid/148/categoryid/25)

or you can just go to the junkyard and find what you need!

Good info. Personally, I'd love to have the new bumper/valance that comes with the "extras" kit for my 2000. (but I could rob the one off the work truck, hmmm...) lol

what are all the parts or things i would need to convert my 97 s10 blazer front end assembly to a 98+ looking style. i was thinkin about hittin up a junk yard possibly so just wanted to get a list of items i needed thanks

You'll need the radiator support, the grille, headlights, signal lights, bumper, valance, and all the fasteners to do the job with.
If your radiator support is welded in, you will have to do some serious fabrication to make it work.