9006 bulb 6000k HID Kit
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04832.jpg

1. Starting with the driver side headlight.
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04833.jpg



2. Lift and remove metal retaining pin.
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04835.jpg



3. Lift and disconnect small plastic clips on headlight wires.
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04840.jpg



4. Remove low beam bulb.
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04841.jpg



5. Insert the 9006 HID Bulb.
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04842.jpg



6. Attach wiring harness
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04844.jpg



7. Plug the wiring harness into the ballast and mount it where ever you can.
<<<NOTE>>>
I had to reverse the polarity when installing my kit
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04845.jpg



(Plugs that lead to Bulb.)
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04847.jpg



(Plug that leads to OE Connector)
http://i111.photobucket.com/albums/n131/ActiveMonkey/DSC04848.jpg



<<<Plug everything in and remount the headlight>>>
Repeat with remaining headlight and you’re done.