Hello
I need to run a wire though a 97 Lumina firewall. I am trying to avoid drilling a new hole if possible. Actaully, I just need to get the wire to the battery, if there is an alternate way of doing so, please let me know. I have read to follow the wire for the hood release and go through that hole, but i think that hole is to small. I could drill a new hole, butI do not know what I may hit on the other side. Any information is greatly apprectiated.

Thanks

I figured this out. Thought I would post my findings.

Next to the grommit for the Hood Open wire, I found 2 small indentions that looked like they where there possible factory bolts. I was able to drill my hole through there and solved my problem.