2020 tahoe ls, lc7i installation help needed
February 20th, 2021, 4:24 PM
#1
CF Beginner
Thread Starter
Join Date: Dec 2015
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2020 tahoe ls, lc7i installation help needed
keeping the factory 8 in radio. adding 600.4 and bass amp.
now the lc7i need high and full range signals? the front doors are full range while the rear doors are high?
do i tap into the positive and neg of both front doors and run 4 wires to the lc7i for the fulkl range and tap into back doors for the high runnin 4 wires back to lc7i?
then use the jumper method? to creat 2 channels for front and rear out the lc7i and then supplies sub lvl from the 3rd?
never needed these convertors for audio i always just ran headunits.. but im completely clueless..
just need to know exactly what to do... any help would be appreciated
now the lc7i need high and full range signals? the front doors are full range while the rear doors are high?
do i tap into the positive and neg of both front doors and run 4 wires to the lc7i for the fulkl range and tap into back doors for the high runnin 4 wires back to lc7i?
then use the jumper method? to creat 2 channels for front and rear out the lc7i and then supplies sub lvl from the 3rd?
never needed these convertors for audio i always just ran headunits.. but im completely clueless..
just need to know exactly what to do... any help would be appreciated
Thread
Thread Starter
Forum
Replies
Last Post