97 z24
May 21st, 2014, 6:07 PM
#1
CF Beginner
Thread Starter
Join Date: May 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
97 z24
Hey guys! I have a 97 Z24 and I had jump started a car and now my fan doesn't
work! I checked the fan motor and it works fine. I had the PCM replaced along with all the fuses/sensors and it still doesn't come on. I have an after market fan set up but it also sucks! Doesn't work properly. Could the factory wiring be fried somewhere between the PCM and the fan motor or is their other fuses/sensors that might be connected to the cooling system that might be damaged? Thanks!
work! I checked the fan motor and it works fine. I had the PCM replaced along with all the fuses/sensors and it still doesn't come on. I have an after market fan set up but it also sucks! Doesn't work properly. Could the factory wiring be fried somewhere between the PCM and the fan motor or is their other fuses/sensors that might be connected to the cooling system that might be damaged? Thanks!
May 21st, 2014, 6:19 PM
#2
Hey guys! I have a 97 Z24 and I had jump started a car and now my fan doesn't
work! I checked the fan motor and it works fine. I had the PCM replaced along with all the fuses/sensors and it still doesn't come on. I have an after market fan set up but it also sucks! Doesn't work properly. Could the factory wiring be fried somewhere between the PCM and the fan motor or is their other fuses/sensors that might be connected to the cooling system that might be damaged? Thanks!
work! I checked the fan motor and it works fine. I had the PCM replaced along with all the fuses/sensors and it still doesn't come on. I have an after market fan set up but it also sucks! Doesn't work properly. Could the factory wiring be fried somewhere between the PCM and the fan motor or is their other fuses/sensors that might be connected to the cooling system that might be damaged? Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Don Meadows
Cavalier
0
October 4th, 2013 12:32 PM