1975 5.7 350 stalls when put into gear
December 2nd, 2007, 11:43 PM
#1
CF Beginner
Thread Starter
Join Date: Dec 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
1975 5.7 350 stalls when put into gear
Just done re-assembling the drive train in this, rebuilt trans and engine and rebuilt carb, Alone with everything else engine compartment oriented replaced. Runs fine in park and at idle, got timing set as specified.
Here's the issue, When I put it into drive, as soon as I give it any gas it stalls it will run at idle, moving forward (5mph) but nothing faster or it stalls again? Any help or general direction to look for would be appreciated.
Here's the issue, When I put it into drive, as soon as I give it any gas it stalls it will run at idle, moving forward (5mph) but nothing faster or it stalls again? Any help or general direction to look for would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
pcheffernan
Monte Carlo & Lumina
0
October 18th, 2014 5:40 PM
Jesse&adara
S-10 & Blazer
0
January 16th, 2012 11:01 AM
