aimsmall

Okay folks, new kids here so take it easy on me...

I've replaced the battery in my key fob transmitter but I can't get the thing to resynch. I've tried holding the buttons down (lock/unlock) for a bit... did the resynch of ON/OFF/ON/OFF holding the lock/unlock buttons down (on the fob) and still nothing.

I opened her back up and checked all the connections and they look good, even checked to be sure I put the battery in the right way... nothing...

what am i doing wrong??

thanks for the help...

jackyshaikh

In order to resynchronize the transmitter with the PDM, perform the following steps:
[align=left]



1.
Stand within 1.5meters (5ft) from the vehicle.[/align][align=left]



2.
Simultaneously press and hold the LOCK and UNLOCK buttons on the transmitter for 7seconds.[/align][align=left][/align]The door locks should cycle in order to confirm resynchronization.

aimsmall

That's it? It seems too simple. No ON/OFF of the ignition switch? I'm sorry to be a pain but I really DON'T want to take it to the dealership because they'll charge me an arm and a leg.

Thanks again...