Welcome to Chevrolet Forum - Chevy Enthusiasts Forums
Welcome to Chevrolet Forum - Chevy Enthusiasts Forums
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
General TechGood at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.
I have a 2006 impala 3900 that started running bad. The check engine light is on a pulled a misfire on #2 cylinder. So i replaced the plugs and wires. Now seems like the car is running worse and scanner say p0300 code a random misfire. Pulled out the plugs and a couple are wet and couple or sutty looking. put in another set and same thing. Any ideal on were to start next? Thanks for the help. Jason
Register today for free or log-in if already registered to remove this ad!
2006 impala misfire
