5 Steps to replace an old car's radio
December 1st, 2016, 5:24 AM
#1
CF Beginner
Thread Starter
Join Date: Nov 2016
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
5 Steps to replace an old car's radio
Hi, recently I have tried to replace the radio of my old Car and I want to
share
the experience, hope it is helpful to others who want to replace their car's
radio too. These are the steps I followed:
1.Gathering the proper tools like screwdrivers,wire strippers,pilers.
2.Disconnect and isolate the negative cable from your car's battery.
3.Remove the old radio from the dashboard of your car.
4.Get a specific model new radio from a manufacturer like seicane.
5.Install the new radio to your car's dashboard opening.
What do you think about this? Is there any steps I miss and any other tips you
can advise?
Thanks & Regards.
share
the experience, hope it is helpful to others who want to replace their car's
radio too. These are the steps I followed:
1.Gathering the proper tools like screwdrivers,wire strippers,pilers.
2.Disconnect and isolate the negative cable from your car's battery.
3.Remove the old radio from the dashboard of your car.
4.Get a specific model new radio from a manufacturer like seicane.
5.Install the new radio to your car's dashboard opening.
What do you think about this? Is there any steps I miss and any other tips you
can advise?
Thanks & Regards.
December 1st, 2016, 11:10 AM
#2
CF Monarch
You don't mention anything about the electrical connections. All radios do not have the same connectors. These will have to be spliced into the old connector or an adapter will need to be bought.