Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Engine and Powertrian
- Chevrolet Silverado 1999-2006 GMT800 How to Replace Camshaft Position Sensor
Step by step instructions for do-it-yourself repairs
Browse all: Engine and Powertrian
camshaft position sensor
#1
camshaft position sensor
I have a 2001 chevy tracker automatic with the 2.0 engine. I had thecar checked out at a local shop and was told that the camshaft position sensor was bad. I called around and found one at autozone for 76.00. I purcashed it and brought it home to put it on. I took the old one off and installed the new one, now the car wont start at all. I then took the new one off and reinstalled the old one and the car started.The car wont run but approx. 30 minutes before it starts to sputter and stall and then will not start back up until I let it sit for a while. Is there a special way to install a new camshaft sensor or is there something else wrong with the car. Does it anything to do with the timing and if so how do I install the new one. The code that I am getting from the service center is P0304 Camshaft position sensor.
Thanks Brian
Thanks Brian
Thread
Thread Starter
Forum
Replies
Last Post
Phill S.
Silverado & Fullsize Pick-ups
1
January 1st, 2013 3:10 AM
dagnabit
Tahoe & Suburban
5
March 16th, 2012 8:44 PM
derry
Beretta, Corsica, & pre-1995 Lumina
0
June 9th, 2007 4:26 PM