Which intake is best
July 11th, 2007, 9:17 PM
#1
CF Beginner
Thread Starter
Join Date: Jul 2007
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Which intake is best
Hello, I am new to the site so i would like to say hello to all the members. I am building a 406sbc for my tube chassis camaro. I am using a set of Brodix Race rite 200 heads that have been cnc to 72cc. The have 2.08 intake valves & 1.60 exhaust. Lunati cam .615 lift. I have narrowed my intake choices down to two. the edelbrock victor jr and the brodix hv1002. I am using a holley dominator so i know i need an adapter for the victor jr. but im just looking for everyone opinion.
July 19th, 2007, 1:22 PM
#2
CF Beginner
Join Date: Jul 2007
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
RE: Which intake is best
Hey There,
Both of them are good but if it were me i would go with the victor jr. Edelbrock has i belive a better rep of good performance than Brodix and i have seen many of them added to camaros at the shop i work at and the results are always better then expected.
Redneck 4 Life
Both of them are good but if it were me i would go with the victor jr. Edelbrock has i belive a better rep of good performance than Brodix and i have seen many of them added to camaros at the shop i work at and the results are always better then expected.
Redneck 4 Life
Thanks redneck 4 life for the info. Some other people ive talked to have pretty much confirmed what you said. thanks Again
Thread
Thread Starter
Forum
Replies
Last Post
silverado 1500 2001
Silverado & Fullsize Pick-ups
4
September 3rd, 2014 1:03 PM
BinkysDad
Silverado & Fullsize Pick-ups
3
October 24th, 2006 11:32 PM
