Problem with 96 2500 5-speed
September 17th, 2007, 12:48 PM
#1
CF Beginner
Thread Starter
Join Date: Sep 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Problem with 96 2500 5-speed
I have a 96 K2500 5-speed with an idle problem. When you are driving and go to shift with the rpms above 3000 the engine stays at 3000 for8-10 seconds. Also according to my scan tool, the tach is off by at least a 1000 rpm and it has low idle air counts and slowly decreases. I've put an upper intake gasket, crankshaft sensor, PCV valve, and an idle air control solenoid from a dealer in. But the vehicleidles good one day but not the next.Any help with this would be greatly appreciated. Thanks.
September 17th, 2007, 6:56 PM
#3
CF Beginner
Thread Starter
Join Date: Sep 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
RE: Problem with 96 2500 5-speed
I have already reset theTPS and it has no drops in the wave form. The MAF sensor has been cleaned once but didn't help so I tried a new one and it made no difference.
Thread
Thread Starter
Forum
Replies
Last Post
captain177
Silverado & Fullsize Pick-ups
2
April 8th, 2021 1:34 AM
ericnottelin
Silverado & Fullsize Pick-ups
1
August 6th, 2012 9:09 PM
5:00 PM
Express & G-Series Vans
0
January 7th, 2012 11:38 AM
