Chevrolet Forum - Chevy Enthusiasts Forums

Notices
General Tech Good at troubleshooting? Have a non-specific issue? Discuss general tech topics here. IF YOUR QUESTION IS SPECIFIC TO A CERTAIN MODEL, IT DOES NOT GO IN THIS SECTION.

Worn lobe on cam??? Help

Thread Tools
 
Search this Thread
 
Old January 4th, 2007, 1:11 AM
  #1  
CF Beginner
Thread Starter
 
mikeryan's Avatar
 
Join Date: Jan 2007
Location:
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Worn lobe on cam??? Help
I have a 84 chevy 350 in my 89 S10 blazer and was running good when I first bought it. Then I lost a lobe on my cam and I replaced the cam and lifters. I checked the push rods and they were ok. New gaskets and all...Two weeks later, lost the same lobe on a new cam. I have asked severl mechanics/ friends and everyone is stumped on this. Any one out there have any idea what might be going wrong???
mikeryan is offline  
Reply Like
Old January 4th, 2007, 2:10 PM
  #2  
CF Active Member
 
Gapp's Avatar
 
Join Date: Sep 2006
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Worn lobe on cam??? Help
Maybe something having to do with the cylinder or piston causng it?
Gapp is offline  
Reply Like
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Is this a brake problem? Or just worn brake pads?
tom5170
General Tech
4
March 19th, 2010 11:57 PM
worn valves or seals?
maxxman04
General Tech
0
March 2nd, 2010 1:27 PM
Worn out ignition? No keys/start
tg6392
General Tech
0
October 23rd, 2008 10:59 PM
5.7 with a worn camshaft?
Nicklatech
Engine Building & Overhauling
1
March 4th, 2007 6:50 PM
454 Distributor gear Worn oddly
454 dually
General Tech
1
August 31st, 2006 10:43 AM
Tags
Back to Subforum
General Tech
View Next Unread
Stalling Issues




Advanced Search
Quick Reply: Worn lobe on cam??? Help


Reply Closed Thread Share

All times are GMT -5. The time now is 5:37 AM.