While this model ended its run, it is not uncommon to see them on the road or off, years after production end.
Platform: Truck, GMT 400
Welcome to Chevrolet forum!
Welcome to Chevrolet forum,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
I'm looking for suggestions on a front axle swap, I run a 383 with a 150 shot of nitrous and I mud bog race so I need a locked front axle. I will probably swap out the rear as well although I haven't broken a rear axle yet, but the welded front IFS just won't take the stress. I currently am running 4:46 gears and 35x16x16 Boggers.
What I need is to hear from someone who has done this swap and what they would do differntly now.
Register today for free or log-in if already registered to remove this ad!