unplug the MAF sensor?
June 18th, 2010, 5:42 PM
#1
CF Beginner
Thread Starter
Join Date: Feb 2010
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
unplug the MAF sensor?
hello i have an '93 oldsmobile cutlass ciera s 3.3 litre with about 160,000 on it. after experiencing some engine hesitation when first accelerating i put new plugs, wires, air filter, fuel filter, sending unit, O2 sensor, vacume lines, cleaned injectors, it got to the point that the car wouldn't move without unplugging the mass airflow sensor. New MAF didn't fix the problem, the car is still undriveable without the maf sensor unplugged. has anyone experienced this problem/ have a solution? plus the obd doesn't set off a code untill the maf is unplugged. i don't think it has map sensor, maybe the tps? Anything would help thanks.
August 5th, 2010, 1:18 PM
#3
CF Beginner
Thread Starter
Join Date: Feb 2010
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
ok so three maf's, new knock, tps, filters, o2, fuel sending unit, computer, and a punched out cat, and the car still isn't working. it also has new plugs and wires and i cleaned the injectors and fixed any bad vacuum lines. anyone have any ideas?
August 9th, 2010, 10:43 AM
#4
CF Beginner
Join Date: Sep 2009
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
In previous posts you said that you replaced the mass air flow sensor and other parts, did you check the resistance at the maf connector?
Last edited by mikeross; August 9th, 2010 at 9:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post
