Chevy s10 truck 2.2l
August 13th, 2012, 5:22 PM
#1
CF Beginner
Thread Starter
Join Date: Aug 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Chevy s10 truck 2.2l
Hey guys im new on here. Just trying to get the hang of it.
So i am working on my buddies s10 2.2l. I verified that his head gasket was blown, so i pulled the head off sent it to the head shop got all checked out and decked. Found 3&4 cylinder exhaust valves were bent. Replaced those. Installed the head and subassemblies. Filled with fluid and went to go start it. The truck just cranks but doesnt start. I checked spark. Good. Check injector operation. They work. Havent checked compression yet doing that tonight.
Anyone have any ideas on what i should check next like maybe a cam or crank sensor? Im not really familiar with chevy so this is new for me.
So i am working on my buddies s10 2.2l. I verified that his head gasket was blown, so i pulled the head off sent it to the head shop got all checked out and decked. Found 3&4 cylinder exhaust valves were bent. Replaced those. Installed the head and subassemblies. Filled with fluid and went to go start it. The truck just cranks but doesnt start. I checked spark. Good. Check injector operation. They work. Havent checked compression yet doing that tonight.
Anyone have any ideas on what i should check next like maybe a cam or crank sensor? Im not really familiar with chevy so this is new for me.
Thread
Thread Starter
Forum
Replies
Last Post
myCHEVYkicksass
OLD - PRIVATE For Sale / Trade Classifieds
0
March 5th, 2009 12:15 PM
