Windshield wiper switch replacement
December 28th, 2010, 9:05 AM
#1
CF Beginner
Thread Starter
Join Date: Dec 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Windshield wiper switch replacement
I am in the process of replacing the wiper switch in a 1991 S10 and have taken the column apart replaced the switch and now I am trying to reassemble the column. I am having trouble aligning the ignition switch gear assembly to the metal bar that activates the switch. Anyone know what position the gear in the switch needs to be in to properly engage the metal bar?? It is difficult to get the ignition switch lever, the dimming switch rod and the steering lock rod to all line up at the same time. ffice
ffice" /><O
></O>
ffice" /><O></O>
Last edited by NCbiker; December 28th, 2010 at 9:05 AM. Reason: vehicle type
Thread
Thread Starter
Forum
Replies
Last Post
croberts
Malibu
6
May 7th, 2011 4:31 AM
stadlgi
Silverado & Fullsize Pick-ups
3
October 6th, 2010 11:40 PM
PatinDenver
Silverado & Fullsize Pick-ups
4
August 6th, 2009 9:14 PM
