You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
Well For starters I have a 94 caprice classic that I'm removing the engine drivetrair and all wiring to put in a 72 c10. I have the entire dash torn apart with the bezel, dashmat, and black support that everything screws into unbolted. I'm only having trouble with the two wire pigtails that plug into the back of the gauge cluster. There are these black plastic covers that look like they slide onto the black plastic that everthing mounts to. Anyone know how to get the wires unpluged from the gauge cluster anything helps.
Register today for free or log-in if already registered to remove this ad!
Nevermind I figured it out. I have the entire dash out and all wiring tagged and organized. Had to cut the door wiring but thats okay cause the truck doesn't have any elecs in the door but ill still put in elec locks and keyless. I have most interior trim pieces in great condition all tan/beige that I won't need. The car was rear ended to back doors on is no good so if anyone needs anything off a tan caprice thats not elec or engine/dribetrain let me know. Thanks.
Help removing guage cluster
