You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
Start by prying up the small plastic cover at the base of the rear headrest. Remove the two 13mm bolts on both headrests and remove the headrests.
Remove the rear upper garnish moldings by prying he small access cover(sedan only) and remove the screw inside the hole. Then pull on the panel to release the clips.
COUPE
SEDAN
Open the trunk, and release the rear seat backs, and fold them down. There are four 10mm bolts next the the latches of the seat backs, remove them. Pull the seat frame forward and remove the push pins from the rear window shelf panel.
The next step can be tricky without removing the seats, but it can be done without ruining any parts.
Remove the rear window shelf panel by pulling it forward. There are four 7mm bolts holding the rear speakers in.
Register today for free or log-in if already registered to remove this ad!
__________________
If you have a question, ask it in the forums. I will no longer be answering questions sent to my email.