You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
pulltriangle trim from the top, pull the trim around door handle, remove lock slider. 7mm bolt behind the lock slider, 7mm under the armrest near the handle, remove push in clip at he front of the skin. If its an early year model, there is another 7mm at the bottom edge of the door, if its was built later in the year, there is a cap on a screw at the rear of the door, which has a T15 or T20 TorX screw in it.
Then just grab the handle of the armrest and pull straight up. pull the skind back a little, d\c the electrical connections, the light on the bottom and your done.
the speaker just clips in, but you may need a couple standard screwdrivers to get it out. One to push down on the clip, and the other to pry the speaker out
__________________
If you have a question, ask it in the forums. I will no longer be answering questions sent to my email.
2004 silverado door speaker install
