You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
Its a 1996 chevrolet corsica V6
I took some parts off a couple of times to try to access the bolts on the housing but I cant even get the socket on them.
It seems like It cant be done with the hard line from the waterpump in the way, I unbolted it from the waterpump end and tried to pry it a bit but no luck.
All the repair manuals show moving the heat shield down a bit ( I have done) but you cannot get at them. Pic.
ANother thing, the car has a strong gassy smell, 02 is good, no leaks under the car, what should I look at?
Any tips for me?
Register today for free or log-in if already registered to remove this ad!
Need help with thermostat 1996 corsica
