You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
I was channel surfing tonight and came across a rebroadcast of a cool episode of Ultimate Factories, at the Kentucky factory that builds the Corvette Z06 (the episode I believe originally aired in late 2007 or early 2008).
We all know of the technology, but to see how it was developed and watch how it goes together is amazing. I neveer knew so much of the Z06, especially the engine, is meticulously hand built one at a time.
Here's a link to a you tube preview excerpt. If you're able to get a hold of the complete episode I highly recommend it.
(ps...sorry if this was already posted...I did 2 searches that came up empty)
In case you haven't read about it, topspeed has a review on the new cargraphic wheels for Corvette Z06, featuring details about the performances as well as a few photos and wallpapers.
"As it comes from the factory, the Z06 is already a very sporty looking machine filled with lots of high tech go fast goodies, but with the help of the German tuners at Cargraphic the hot rod C6 Corvette can look even better. The new rollers measure 19 inches in diameter up front and 20 inches in the rear..."
Corvette Z06 Factory video
Cargraphic wheels for Corvette Z06
