You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
i have a 1996 monte carlo z34 with 170000 miles, lots of up grades ,just put a new trans and aftermarket cruse on it, and low and behold now have a blown head gasket, what i would like to know is , is there a difference in the 4.3 motor from a front wheel drive with auto trans, and lets say a 4.3 motor out of a s 10 pickup with rear wheel drive, i know the trans on both are different, but is the block assembly bolt up to the trans the same, what i would like to do is just put a stock none overhead cam motor in the car, for a daily driver, the z34 motor is very hard to work on and i would rather have a lets say stock 4.3 out of a rear wheel drive s 10. any help would be appreciated..........thanks
Register today for free or log-in if already registered to remove this ad!
moyor swap 96 monte z34
