You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
I have a 1996 Chevy Corsica with the v6 in the morning i am going to pull it into the front yard and completely strip everything from inside the car except the driver seat and dash which will be cut up so as there isnt as much of it possibly remove the entire thing and just add in a tac above the steering wheel. Gonna clean up the plugs and wires see if i can get it to quit missing so bad.
There seems to be a little water and oil or some sort of nasty gunk that looks simular to that on the back 3 plugs on the motor could that be from a blown gasket? or is something happening with my plugs that maybe i dont understand?
My car has power everything so im gonna rip that out of the doors and junk and get rid of the a/c in it because it wont be a daily driver it doesnt need it.
Also do you guys think that the 3.8L supercharged regal motor will mount in the front of my corsica? can i put a manual tranny to that motor and be able put it in the corsica it has a automatic in it right now which brings me to the next question what would i need exactly to put a 5spd in the car or where could i find the information containing what i would have to have?
Appreciate the help and advice ... I hope this car can be a fun lil honda burner
Register today for free or log-in if already registered to remove this ad!
__________________
<dreamin sleeper creep up on ya and leave ya in the dust>