You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
In the process of removing the water pump removed what i thought were all the bolts but it won't come off. it pivots side ways left and right, I put my finger on the bottom of the water pump and i feel a bolt that it may be pivoting on but it is impossible to get a wrench to for the pulley is in the way. Over the years ive changed water pumps with bolt on pulleys, im not familiar with a press on type of water pump pulley I would like to know if that is indeed the case. It is the same type of pulley as the tensioner pulley in which i removed by removing the bolt. But this pulley does not have a nut , it has a round knob. Any help would be greatly appreciated. And if so would a normal three prong wheel puller do the job. Thanks
Register today for free or log-in if already registered to remove this ad!
1989 2.5L water pump/pulley removal ?
