You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to start new topics, reply to conversations, privately message other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Chevrolet forum today!
I just bought some Kicker 6.5" speakers for the front and when I tried to put them in, they leave a gap. The gap is due to the bottom of the stock speaker mount extends and covers the gap.
The stock speaker is attached to the actual speaker mount, so I can't reuse the mount for the new speaker without cutting the stock speaker out.
When I put the new speaker in, it looks like this
Notice the gap below the bottom of the speaker where the green wire is visible.
Is there some material to fill in that gap? Foam and some type of glue? Best Buy offered to cut out the stock speaker of the frame and put in the Kicker speaker in the stock frame for $60, but if there is a cheaper alternative, I will do it.
Thanks
Register today for free or log-in if already registered to remove this ad!
Front Speaker question
