**HELP PLEASE** 1996 k1500 Starter Prob.
July 25th, 2012, 9:47 AM
#1
CF Beginner
Thread Starter
Join Date: Jul 2012
Location: Tennessee
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
**HELP PLEASE** 1996 k1500 Starter Prob.
My Truck Died On Me 2 Times And Wouldnt Get Fire So I just changed out my distributer and distributor rotor and ign. module and it fired, BUT finally got all that done and now my starter is hanging up. ive tried shimming with 1, 2, & even 3 shims. the starter just sounds like a power drill, its not clicking or anything, ive checked all teeth on starter and flywheel. all good, im lost!!!! 
Even Tried Turning The Crank To loosin It The Crank Is Very Tight & It Will BarelyTurn Even With The Starter Out It'll Barely Move And Sometimes Won't... What Can I Do?? Please Any Help Appreciated !
<!-- / message -->
Even Tried Turning The Crank To loosin It The Crank Is Very Tight & It Will BarelyTurn Even With The Starter Out It'll Barely Move And Sometimes Won't... What Can I Do?? Please Any Help Appreciated !<!-- / message -->
<!-- controls -->
Last edited by -Dent Boys Offroading.; July 25th, 2012 at 9:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post
rickybobby2189
Silverado & Fullsize Pick-ups
13
September 21st, 2021 12:16 AM
tone72885
Silverado & Fullsize Pick-ups
4
July 25th, 2012 2:13 PM
duckdivin
Tahoe & Suburban
3
February 11th, 2010 4:01 PM
freedomfighter_87
General Tech
4
December 7th, 2009 7:32 PM
freedomfighter_87
Beretta, Corsica, & pre-1995 Lumina
0
December 3rd, 2009 6:30 PM
