How to manually wire a backup camera to stock Nav Unit
January 5th, 2012, 7:22 AM
#1
CF Beginner
Thread Starter
Join Date: Jan 2012
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
How to manually wire a backup camera to stock Nav Unit
I have seen this discussed inside other topics, but there's not actually a thread made specifically for it.
I have a 2007 Silverado with the Bose Nav system in it. I have heard that 07's come wired for an aftermarket backup cam, and that the junction box for this is under the passenger seat. Does anyone know much about that?
The next thing that I have heard is that you can buy a certain type of RCA connector from radio shack, and wire this directly to the C4 connector using pins 6 and 7 in order to connect the RCA connector to that comes from the camera. Can anyone shed some light on what type of RCA cable can be used to do this?
I have a 2007 Silverado with the Bose Nav system in it. I have heard that 07's come wired for an aftermarket backup cam, and that the junction box for this is under the passenger seat. Does anyone know much about that?
The next thing that I have heard is that you can buy a certain type of RCA connector from radio shack, and wire this directly to the C4 connector using pins 6 and 7 in order to connect the RCA connector to that comes from the camera. Can anyone shed some light on what type of RCA cable can be used to do this?
Thread
Thread Starter
Forum
Replies
Last Post
chassispro
Tahoe & Suburban
0
May 5th, 2014 9:11 PM
Ugadawg
Audio/Visual Electronics
1
July 7th, 2012 10:29 PM
