4x4 tahoe
#1
CF Beginner
Thread Starter
Join Date: Jun 2010
Location: Okla
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
4x4 tahoe
I have a 98 tahoe 4x4 with auto4,making noise in 4wd like its not engage all the way,the 4wd works, more noise in 4lo,keep hearing of the encoder,it did lock in 4wd but i turn it off for 30/45seconds and it went in 2wd any help would help me out alot
#2
Hi kevinll63,
Welcome to the Chevy Forums.
The Off-Topic lounge is for subjects which don't pertain to vehicle repair and troubleshooting. It's OK, I moved it here to the Tahoe Forum.
We get a LOT of questions about the automatic 4WD sticking, as you'll see if you do a thread search here. I don't want to say GM rushed Auto4WD into production without working out all the kinks, but a common problem for occasional 4WD users with Auto4WD is the actuating rods in the solenoids which engage the drives tend to atrophy a slight bit with disuse, just enough to overcome the strength of the inductive force of the solenoid coils.
Welcome to the Chevy Forums.
The Off-Topic lounge is for subjects which don't pertain to vehicle repair and troubleshooting. It's OK, I moved it here to the Tahoe Forum.
We get a LOT of questions about the automatic 4WD sticking, as you'll see if you do a thread search here. I don't want to say GM rushed Auto4WD into production without working out all the kinks, but a common problem for occasional 4WD users with Auto4WD is the actuating rods in the solenoids which engage the drives tend to atrophy a slight bit with disuse, just enough to overcome the strength of the inductive force of the solenoid coils.
Thread
Thread Starter
Forum
Replies
Last Post
technicauto
Tahoe & Suburban
0
May 4th, 2011 5:14 PM
cowboyfromhell
Silverado & Fullsize Pick-ups
0
June 5th, 2007 9:31 AM