d1nonly34

My friend at the dealer says that when I switched my dash, a harness that sends signal from the module is not sending signal to my computer, reason being is because (according to the tech) there is a harness on the passenger side to the right of the glove box where the connections are different. Basically I need the schematics to my Tahoe and the Tahoe with the new dash to compare. If anyone can help me out and tell me where I can obtain the schematics I would greatly appreciate it. The tech said he would fax them to me but that was over a week ago and he seems extremely busy. Thanks in advance.

d1nonly34

anyone? =/

shawnvw

Can you be more specific?......which connector....how many pins are in the connector in question....maybe take a pic of it?
There are soo many options and connectors we need to know exactly what we're after.

d1nonly34

ill try and take a pic and post it tomorrow, but basically im going by what my tech told me. He just told me that the harness led to the passenger side compartment. (The opposite side of the fuse box on the drivers side). But its just 3 harnesses with no fuses. I dont know how to explain it better. When you open the passenger door its the panel that comes off to the right of the glove box and above the passnger kick panel. Im not even sure if thats where Im supposed to be looking though, shawnvw you would know better than I would where the signal from the front seat airbags go to and from.

shawnvw

Is it possible to get the vin of your truck, and the vin that the dash came out of?
Need to know some of the option codes

d1nonly34

yes i have them both? do i PM them to you or post them here. The tech said he needed both vins to be able to match the cables correctly.

shawnvw

you can PM them to me if you don' feel comfortable posting them

d1nonly34

new dash vin: 1GNFK13087J136698 (from a 2007 tahoe ltz 4x4)

my vin: 1GNFC13058J100224 (I have a 2008 tahoe lt1)

shawnvw

I'm sorry man....I need a pic for reference. I don't think its the junction block in the door jamb you are talking about, There aren't any airbag wires in there

d1nonly34

Thats what I thought, im having a hard time getting a camera to take the pic. Maybe you would know from your own knowledge where the signal/data wires from the airbag module go to? If anything I would think it would be somewhere on the drivers side.. kick panel or perhaps fuse box area?