95 k2500 454 tbi, vss/egr/ols delete?
August 20th, 2012, 12:36 AM
#1
CF Beginner
Thread Starter
Join Date: Aug 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
95 k2500 454 tbi, vss/egr/ols delete?
i have a 95 k2500 454 tbi suburban and i want to put a 205 transfer case in the truck but need to know what is neccessary to delete the vss? anyone have a diy on this or know who i should ask? would also like to delete the egr and oil level switch at the same time as these are not necessary in the tbi setups. please advise. thank you for your time, mike in oklahoma
August 20th, 2012, 1:14 AM
#2
CF Beginner
Thread Starter
Join Date: Aug 2012
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
PS... the truck has a 4l80e in it and my understanding is the truck wont shift if the vss from the stock transfer case isnt signaling the pcm. i want to put a th400 version of the np205 transfer case in the truck but there is no vss. how do i replicate the signal back to the pcm? put a 40tooth reluctor on the driveshaft and run the vss off of that?
Thread
Thread Starter
Forum
Replies
Last Post
Schmutz
Silverado & Fullsize Pick-ups
4
December 10th, 2013 9:01 PM
heavychevy511
Silverado & Fullsize Pick-ups
6
October 31st, 2012 8:43 PM
jrsavoie
Silverado & Fullsize Pick-ups
0
February 24th, 2010 2:38 PM
