2000 Venture hose from aux water pump
November 25th, 2012, 4:10 PM
#1
CF Beginner
Thread Starter
Join Date: Nov 2012
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
2000 Venture hose from aux water pump
I just did an intake manifold gasket job on my minivan and it's mostly put back together. I can't figure out where this hose connects. Any help? I'd greatly appreciate it!
It's an extended Warner Bros. It had the dreaded faulty intake gasket. If I can get this hose connected. I'm an hour away from being done! Hopefully it didn't belong under the upper intake/plenum.
Thanks!
It's an extended Warner Bros. It had the dreaded faulty intake gasket. If I can get this hose connected. I'm an hour away from being done! Hopefully it didn't belong under the upper intake/plenum.
Thanks!
November 27th, 2012, 12:38 PM
#2
CF Junior Member
Join Date: Aug 2011
Location: Vancouver, BC
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
If you are referring to this hose:
Then that hose is for coolant back circulation from heater core, it should plug in back there - see red arrow.
Then that hose is for coolant back circulation from heater core, it should plug in back there - see red arrow.
Last edited by Tegnus; November 27th, 2012 at 12:41 PM.
December 3rd, 2012, 12:44 PM
#3
CF Beginner
Thread Starter
Join Date: Nov 2012
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Thanks! I tore the plenum off the intake again to get to it and snapped this picture as a reference. I couldn't quite see the hole in your picture, but I saw the protrusion. Thanks again!
Last edited by dougmr; December 3rd, 2012 at 12:49 PM. Reason: picture link not working
Thread
Thread Starter
Forum
Replies
Last Post
