Engine miss after restart
July 8th, 2011, 7:37 AM
#1
CF Beginner
Thread Starter
Join Date: Jul 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Engine miss after restart
2003 6.0 Liter Express 3500.
I have had this problem for several weeks. When I start and run when the engine is cold there are no problems. Drive a few miles and shut off and restart the engine seems to run on only a few cylinders.
I read out the codes and it shows a miss fire. I changed the drivers side o2 sensor, that made no difference. We have changed the plugs, wires, still the problem is still there.
When it miss fires after the restart all I can do is pull over and let it cool for a few minutes, everything is fine.
I have not checked the coil packs yet.
Any ideas are greatly appreciated.
Merl Root
I have had this problem for several weeks. When I start and run when the engine is cold there are no problems. Drive a few miles and shut off and restart the engine seems to run on only a few cylinders.
I read out the codes and it shows a miss fire. I changed the drivers side o2 sensor, that made no difference. We have changed the plugs, wires, still the problem is still there.
When it miss fires after the restart all I can do is pull over and let it cool for a few minutes, everything is fine.
I have not checked the coil packs yet.
Any ideas are greatly appreciated.
Merl Root
Thread
Thread Starter
Forum
Replies
Last Post
BurbFan
Tahoe & Suburban
21
March 3rd, 2016 6:36 PM
kenposifu1
Silverado & Fullsize Pick-ups
3
October 27th, 2013 9:57 AM
gnorton52
Silverado & Fullsize Pick-ups
2
May 23rd, 2011 11:59 AM
