Chevrolet  Forum - Chevy Enthusiasts Forums

Chevrolet Forum - Chevy Enthusiasts Forums (https://chevroletforum.com/forum/)
-   Express, Savana & G-Series Vans (https://chevroletforum.com/forum/express-savana-g-series-vans-30/)
-   -   2005 chevy express 2500 key fob programming (https://chevroletforum.com/forum/express-savana-g-series-vans-30/2005-chevy-express-2500-key-fob-programming-47303/)

e_skurka Dec 22, 2011 6:53 AM

2005 chevy express 2500 key fob programming
 
Just bought a 2500 express conversion van I have 2 gm remote key fobs.

The instructions that came with them says jump pin 4 and 8 together..

Cant there in no pin 8 ? Does anyone know how I can do this without taking it to a dealer...

Taking the Family on a 24 hr ride to florida and would love to be able to lock and unlock the doors with the key fob. :)

thanks so much

If you can email me e_skurka@yahoo.com that would be awesome too.

Merry Christmas

Chevrolet Customer Service Dec 22, 2011 3:02 PM

e_skurka,

Are you sure there is no pin 8? Pin 4 is the 4th from the left, top row pin 8 is the far right, top row.

Matching Transmitter(s) to Your Vehicle

Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. Remember to bring any remaining transmitters with you when you go to your dealer. When the dealer matches the replacement transmitter to your vehicle, any remaining transmitters must also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not unlock your vehicle. Each vehicle can have a maximum of four transmitters matched to it.

Resynchronization

Resynchronization may be necessary due to the security method used by this system. The transmitter does not send the same signal twice to the receiver. The receiver will not respond to a signal that has been sent previously. This prevents anyone from recording and playing back the signal from the transmitter.

To resynchronize your transmitter, stand close to your vehicle and press and hold the lock and unlock buttons on the transmitter at the same time for seven seconds. The door locks should cycle to confirm synchronization. If the locks do not cycle, see your dealer for service.

I hope this information is helpful. If you still are having trouble programming the fob(s), you may have to stop by your dealer.

If you have any additional questions, please feel free to contact me.

Have a great day!

Louis
GM Customer Service

ike1 May 16, 2025 5:58 PM

I have a 2015 chevy express 2500. I just had a locksmith tell me they dont have a remote module and therefore cant have key fobs. Can anyone confirm that claim? Is there anyway to add a remote module to this vehicle?


All times are GMT -5. The time now is 4:25 AM.


© 2026 MH Sub I, LLC dba Internet Brands