Chevrolet Forum - Chevy Enthusiasts Forums

Chevrolet Forum - Chevy Enthusiasts Forums (https://chevroletforum.com/forum/)

- General Tech (https://chevroletforum.com/forum/general-tech-10/)

- - bore out 283 to 350 (https://chevroletforum.com/forum/general-tech-10/bore-out-283-350-a-15458/)

justchilln1424

April 28th, 2008 1:29 PM

bore out 283 to 350

Is it possible to bore a 283 to a 350. if not what is the max a 283 can be bored out to.

313hitman

April 28th, 2008 8:52 PM

RE: bore out 283 to 350

why not just get a 350 block from somewhere. 350's are all around and very affordable, it doesnt make sense to bore a 283 out.

old dog

April 29th, 2008 5:35 PM

RE: bore out 283 to 350

i would not advise it for the small price of a 350 block ,not to mention the cylinder's will be paper thin ,when you take about 1/8 of a inch out of the bore ,this would truly a grenade motor .

2tallcustomz

May 3rd, 2008 2:52 AM

RE: bore out 283 to 350

that is true. the most you could bore out a 283 would be 60 over. which would but it at about 300cui. even that is a dangerous thing to do. anymore than that and you are asking for problems

All times are GMT -5. The time now is 12:35 AM.