Chevrolet  Forum - Chevy Enthusiasts Forums

Chevrolet Forum - Chevy Enthusiasts Forums (https://chevroletforum.com/forum/)
-   HHR (https://chevroletforum.com/forum/hhr-51/)
-   -   2006 HHR rear wiper blade (https://chevroletforum.com/forum/hhr-51/2006-hhr-rear-wiper-blade-19097/)

blueshark November 20th, 2008 10:16 PM

2006 HHR rear wiper blade
 
[:@] today i took my 2006 HHR LT into the dealer for a recall on the impact area above the passenger door, took an hour and a half to install this recall. While I was waiting to get the HHR back I asked the dealer to install a new wiper blade(gm part I got off e-bay) the dealer charged me $11.00 to install the rear blade! I wonder why gm is going broke? they seem to over charge for just about anything they can get by with.:eek:

Shideler Racing December 19th, 2008 9:51 AM

RE: 2006 HHR rear wiper blade
 
what is the recall for? i havent heard of it or recieved a notice

blueshark December 19th, 2008 10:22 AM

RE: 2006 HHR rear wiper blade
 
the recall is a TSB bulletin to fix the paint chipping area on the rear fenders for those HHR's that do not have running boards installed

blueshark December 20th, 2008 10:11 PM

RE: 2006 HHR rear wiper blade
 
sorry about the last post I didn't get enough sleep the nite before: the recall on the head liner above the passenger door is fixed at the dealer, it takes about an hour at the dealer, they put in more padding material above the door looks the same on the inside of the car, just smells of glue for about 4 hours after.[8D]

skywrt5 February 16th, 2009 7:37 AM

I also didn't receive or see anything on recall, do you need a letter or other info when you call or go into dealer?

blueshark February 20th, 2009 9:39 PM

safety recall headliner
 
No you don't need a letter although I got one from the dealer, you can ask the dealer to look up your vin# and see if you are affected by the recall.

shawnvw February 21st, 2009 8:27 AM

April 2008
Dear General Motors Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that all 2006-2007 model year and certain 2008 model year Chevrolet HHR vehicles without roof-rail airbags, fail to conform to Federal Motor Vehicle Safety Standard 201, "Occupant Protection in Interior Impact." As a result, GM is conducting a safety recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.

Important:
Your vehicle is involved in recall 08016.
Schedule an appointment with your GM dealer.
This service will be performed for you at no charge .

Why is your vehicle being recalled?
In tests at an impact point near the attachment of the sun visor to the roof, the Standard's requirement was exceeded. If a front seat occupant's head contacts that point in a crash, the occupant's injury could be increased.
What will we do?
Your GM dealer will install an additional energy absorbing device between the front headliner and the vehicle roof on the driver and passenger side. This service will be performed for you at no charge . Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual service time of approximately 30 minutes.
If your vehicle is within the New Vehicle Limited Warranty your dealer may provide you with shuttle service or some other form of courtesy transportation while your vehicle is at the dealership for this repair. Please refer to your Owner’s Manual and your dealer for details on courtesy transportation.
What should you do?
You should contact your GM dealer to arrange a service appointment as soon as possible. Bring the enclosed customer reply form with you when you visit your dealer. The form identifies the repairs required. If you no longer own this vehicle, please let us know by completing the form and mailing it back to us.
Do you have questions?
If you have questions or concerns that your dealer is unable to resolve, please contact the appropriate Customer Assistance Center at the number listed below. More information about this recall can be found at the Owner Center at MyGMLink, http://www.gm.com/recall
Division
Number
Text Telephones (TTY)
Chevrolet
1-800-630-2438
1-800-833-2438
Guam
1-671-648-8450

Puerto Rico - English
1-800-496-9992

Puerto Rico - Espaņol
1-800-496-9993

Virgin Islands
1-800-496-9994


If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to http://www.safercar.gov.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Scott Lawson
General Director,
Customer and Relationship Services
Enclosure
08016

shawnvw February 21st, 2009 8:28 AM

#08016A: FMVSS Noncompliance - Head Impact Protection - Increased Protection - (May 27, 2008)


http://gsi.xw.gm.com/image_en_us/gif.../999999995.gif
Subject:08016A -- Head Impact Protection - Increased Protection

Models:2006-2008 Chevrolet HHR
Without Roof-Rail Airbags
U.S. Vehicles Only



The service procedure in this bulletin has been revised to clarify the installation of the energy absorbing device. Please discard all copies of bulletin 08016, issued March 2008.

Condition

General Motors has decided that all 2006-2007 model year and certain 2008 model year Chevrolet HHR vehicles without roof-rail airbags, fail to conform to Federal Motor Vehicle Safety Standard 201, "Occupant Protection in Interior Impact." In tests at an impact point near the attachment of the sun visor to the roof, the Standard's requirement was exceeded. If a front seat occupant's head contacts that point in a crash, the occupant's injury could be increased.

Correction

Dealers are to install an additional energy absorbing device between the front headliner and the vehicle roof on the driver and passenger side.

Vehicles Involved

Involved are all 2006-2007 model year and certain 2008 model year Chevrolet HHR vehicles without roof-rail airbags and built within these VIN breakpoints:

Important: Dealers are to confirm vehicle eligibility prior to beginning repairs by using the GM Vehicle Inquiry System (GMVIS). Not all vehicles within the above breakpoints may be involved.

For dealers with involved vehicles, a listing with involved vehicles containing the complete vehicle identification number, customer name, and address information has been prepared and will be provided through GM DealerWorld Recall Information. Dealers will not have a report available if they have no involved vehicles currently assigned.
The listing may contain customer names and addresses obtained from Motor Vehicle Registration Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary to complete this recall is a violation of law in several states/provinces/countries. Accordingly, you are urged to limit the use of this report to the follow-up necessary to complete this recall.

Parts Information

Parts required to complete this recall are to be obtained from General Motors Service and Parts Operations (GMSPO). Please refer to your "involved vehicles listing" before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order. In an emergency situation, parts should be ordered on a CSO = Customer Special Order.
Part Number
19206742

Description
Absorber Kit, Hdlng T/Pnl Engy Frt

Qty/ Vehicle
1

Service Procedure

Tools Required

Hot Glue Gun

Important: Install the energy absorbing (EA) plastic piece into the headliner at both the driver and passenger side A-pillar locations.

  1. http://gsi.xw.gm.com/image_en_us/gif...51/2051215.gif

    Remove the A-pillar trim panels. Refer to Windshield Garnish Molding Replacement in SI.
  2. Remove the sunshades from the vehicle. Refer to Sunshade Replacement in SI.
    http://gsi.xw.gm.com/image_en_us/gif...51/2051227.gif

  3. Remove the door weatherstrip (1).
    http://gsi.xw.gm.com/image_en_us/gif...87/2087258.gif

    Important: The headliner will drop about 203 mm (8 in), which will provide adequate room to install the insert energy absorbing (EA) plastic piece (2) into the headliner (3). Use GM Care Hot Melt Adhesive Sticks (P/N 12377914) or equivalent to glue the EA plastic piece (2) into the headliner (3).
  4. Locate the installation point for installing the energy absorbing (EA) plastic piece (2) onto the A-pillar edge (1) of the headliner (3).
    http://gsi.xw.gm.com/image_en_us/gif...51/2051219.gif

    http://gsi.xw.gm.com/image_en_us/gif...51/2051222.gif

    Important: The EA plastic pieces are marked "LH" (2) for left hand (driver’s side) and "RH" for right hand (passenger’s side).
  5. Apply hot glue to the energy absorbing (EA) plastic piece pocket areas (1).
    http://gsi.xw.gm.com/image_en_us/gif...87/2087259.gif

    http://gsi.xw.gm.com/image_en_us/gif...87/2087258.gif

    Important: Ensure that the energy absorbing (EA) plastic piece (2) is installed onto the front edge (1) of the existing headliner plastic piece. The body of the EA plastic piece should be firmly attached to the headliner (3).
  6. Insert the energy absorbing (EA) (2) plastic piece onto the existing plastic piece on the headliner with hot glue.
  7. Tuck headliner in place to ensure proper fit with the A-pillar trim panels and sunshades.
    http://gsi.xw.gm.com/image_en_us/gif...51/2051215.gif

  8. Install the A-pillar trim panels. Refer to Windshield Garnish Molding Replacement in SI.
  9. Install the sunshades. Refer to Sunshade Replacement in SI.
    http://gsi.xw.gm.com/image_en_us/gif...51/2051227.gif
  10. Install the door weatherstrip (1).



Maxy July 22nd, 2010 3:23 AM

I don't know where to start...


All times are GMT -5. The time now is 7:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands