98 Z71 no 4WD
Truck is a 98 Z71 with the floor shift 4x4. The Transfercase engages but the front actuator does not extend. The actuator is good, has been tested on my wifes suburban. I have replaced the transfercase switch and last but not least the 20a 4x4 fuse is good.
Actuator plug: I am getting my key on power and the ground is good. Transfer case plug: my test light is showing power on all 3 wires with the plug pulled from the switch. This is what confuses me, shouldnt only one wire have power untill the tcase switch is engaged? I am ready to run new wires from the switch to the actuator but the wire colors dont all match. Please post any wiring diagrams or a picture of the whole harness. Is thier another fuse or relay somewhere i cant find? I own both the Chiltons and Hayes manuals and neither one show any diagrams ect. Thanks for your help. |
1 Attachment(s)
Here is a drawing to help.
|
Fixed, was a cut wire about 8" from the transfer case switch.
|
All times are GMT -5. The time now is 3:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands