Needing wiring diagram for my 63 Panel Truck build
#1
Needing wiring diagram for my 63 Panel Truck build
Hi, new to the forum and looking for some help! I have a 1963 Chevy Panel Truck that I'm building from the ground up to lay on the ground. It's bodydropped on 84 axles. I am running a drivetrain from a 95 RV which was based off a G30 van. It had a TBI 350 with a 4L80E tranny.
I have the drivetrain in my 63 and have it running with the 95 RV column laying on the floor. I need to wire the ignition from the g30 harness into the ignition of the 63. I also need to wire in the turn signals. The rest I think will work.
Can anyone help me with a wiring diagram of the ignition and turn signals for a g30 van or truck equivalent? I'm guessing the wiring is pretty similar if not the same for a 95 truck with TBI.
Thanks in advanced.
Here's a pic of my panel truck.
Attached Thumbnails
I have the drivetrain in my 63 and have it running with the 95 RV column laying on the floor. I need to wire the ignition from the g30 harness into the ignition of the 63. I also need to wire in the turn signals. The rest I think will work.
Can anyone help me with a wiring diagram of the ignition and turn signals for a g30 van or truck equivalent? I'm guessing the wiring is pretty similar if not the same for a 95 truck with TBI.
Thanks in advanced.
Here's a pic of my panel truck.
Attached Thumbnails
#2
you might try these people to see if they have a factory chassis service manual .
Factory Auto Manuals is a specialist dealer in quality used factory car manuals. We are the Automotive Manual People!
Factory Auto Manuals is a specialist dealer in quality used factory car manuals. We are the Automotive Manual People!
Thread
Thread Starter
Forum
Replies
Last Post
63PanelTruck
Express & G-Series Vans
1
November 3rd, 2014 6:24 AM
primetime21tb
Silverado & Fullsize Pick-ups
2
February 27th, 2014 8:31 PM
Shaun_95
Silverado & Fullsize Pick-ups
5
November 23rd, 2009 9:56 AM