OBD2 Code P1870
April 15th, 2008, 4:59 PM
#1
CF Beginner
Thread Starter
Join Date: Apr 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
OBD2 Code P1870
While pulling a trailer earlier this weekthe "Service Engine Soon" light came on. I took a reading and the OBD2 code P1870 "Transmission Component Slipping" came up. I did notice the transmission shifting hard between 1st and 2nd while pulling the trailer, but no problems since. Light is still on. Any suggestions????
April 15th, 2008, 7:14 PM
#3
RE: OBD2 Code P1870
You're dealing with one of the problems listed below:
A cracked or leaking TCC solenoid.
A cut, damaged or missing turbine shaft O-ring seal.
A converter clutch valve which does not have full travel of 1/2" or is stuck in the off position.
A slipping clutch or band.
A cracked or leaking TCC solenoid.
A cut, damaged or missing turbine shaft O-ring seal.
A converter clutch valve which does not have full travel of 1/2" or is stuck in the off position.
A slipping clutch or band.
August 5th, 2008, 9:49 AM
#4
CF Beginner
Join Date: Aug 2008
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: OBD2 Code P1870
Wow. Great forum.
I will just add to this post i guess.
96' K1500 silverado 4x4 4L60E.
This tranny is only a year old. Built by a pro gm specialist here locally. Very low miles on it. Just back and forth to work.
Today i went to town. I had my 4wheeler in the back. Lots of stop and go, and idiots on cell phones staring at greenlights.
Anyways, got this code on the cruise back home. P1840.
I also noticed on the way back home, no lock up. I pulsed the pedal, but it wouldnt kick in.
Any thoughts? Im gonna have to drive it to work tonight.
Is that a no no?
Thanks for taking the time.
I will just add to this post i guess.
96' K1500 silverado 4x4 4L60E.
This tranny is only a year old. Built by a pro gm specialist here locally. Very low miles on it. Just back and forth to work.
Today i went to town. I had my 4wheeler in the back. Lots of stop and go, and idiots on cell phones staring at greenlights.
Anyways, got this code on the cruise back home. P1840.
I also noticed on the way back home, no lock up. I pulsed the pedal, but it wouldnt kick in.
Any thoughts? Im gonna have to drive it to work tonight.
Is that a no no?
Thanks for taking the time.
Thread
Thread Starter
Forum
Replies
Last Post
