Notices
Silverado & Fullsize Pick-ups The Silverado has been one of the best selling trucks in the US for decades, and is truly proven to be "like a rock".

2014 Chevy Silverado
Platform: Truck, GMT 400, 800, & 900

Rough Idle At Start Up!

Thread Tools
 
Search this Thread
 
Old January 22nd, 2012, 2:58 PM
  #1  
CF Beginner
Thread Starter
 
musickerns's Avatar
 
Join Date: Dec 2010
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Rough Idle At Start Up!

I have a 2002 GMC Sierra 1500 4.8L, When I start it when its cold, it idles very rough hard to keep it running also running rich until it starts to warm up then all is good. no MIL.<!-- google_ad_section_end -->

Last edited by MDTAHOE; January 22nd, 2012 at 7:12 PM.
Old January 20th, 2023, 6:17 PM
  #2  
CF Beginner
 
g9volt's Avatar
 
Join Date: Jan 2012
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

I am currently having a similar problem with my 2000 2500 6.0. The "Extreme rough idle on cold start" post. I get a P0336 ( crank position sensor) code that clears up when the motor warms up and smooths out. It then runs fine the rest of the day no matter how many or how long my stops are. Earlier when not as bad, kind of your type scenario, I got a code for O2 sensor, bank 2 #2, replaced it, cleared that code then P0336 started. Now, after 10-15 minutes of warm up idling, it runs perfect. I'm reading about a driving procedure for having the ECM RE-LEARN the crank position sensor. I'll let you know
Old January 20th, 2023, 6:21 PM
  #3  
CF Beginner
 
g9volt's Avatar
 
Join Date: Jan 2012
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

I am currently having a similar problem with my 2000 2500 6.0. The "Extreme rough idle on cold start" post. I get a P0336 ( crank position sensor) code that clears up when the motor warms up and smooths out. It then runs fine the rest of the day no matter how many or how long my stops are. Earlier when not as bad, kind of your type scenario, I got a code for O2 sensor, bank 2 #2, replaced it, cleared that code then P0336 started. Now, after 10-15 minutes of warm up idling, it runs perfect. I'm reading about a driving procedure for having the ECM RE-LEARN the crank position sensor. I'll let you know
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
g9volt
1999 - 2006 (GMT800)
3
February 17th, 2023 8:42 PM
Gunabgr8
Silverado & Fullsize Pick-ups
1
November 25th, 2022 2:09 PM
Railroadertwo
Beretta, Corsica, & pre-1995 Lumina
0
October 3rd, 2014 5:18 PM
Kurtnelson08
General Tech
0
October 5th, 2010 11:10 AM
kb9mnm
Cavalier
4
May 24th, 2009 8:56 PM



Quick Reply: Rough Idle At Start Up!



All times are GMT -5. The time now is 10:09 PM.