transmission does not engage
January 11th, 2018, 2:27 PM
#1
Newly Registered
Thread Starter
Join Date: Jan 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
transmission does not engage
2010 Suburban 4wd - I went to my parking spot to go to work, started it and then put it into 4wd (it had just snowed) and shifted into R BUT tranny did not engage at all; so I shifted into D; it still did not engage.
I turned it off and came back in 10 minutes, started it and shifted into 2wd and R and it engaged. I backed up, shifted into D and it engaged. I went forward less than 100 feet and it disengaged. It would no engage unless I turned it off and started over. I now have it parked.
Any ideas?
I turned it off and came back in 10 minutes, started it and shifted into 2wd and R and it engaged. I backed up, shifted into D and it engaged. I went forward less than 100 feet and it disengaged. It would no engage unless I turned it off and started over. I now have it parked.
Any ideas?
