2003 2500hd 6.0
January 12th, 2017, 7:33 PM
#1
CF Beginner
Thread Starter
Join Date: Apr 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2003 2500hd 6.0
Im having the Reduced Engine Power. I have been researching and have checked wiring, cleaned carbon from throttle body and all the obvious. My new question is I ran across a forum that suggested my cooling sensor. I have an idea that could cause this. My truck idles in my driveway and operates fine for almost exactly 30 minutes then it comes back on. I try something else.....restart it and in 30 minutes it acts up again. THOUGHTS?!?!?
January 12th, 2017, 11:17 PM
#2
post the code that is setting.
link the forum article.
imo most reduced engine power faults are caused by throttle actuator or accelerator pedal position sensor faults.
link the forum article.
imo most reduced engine power faults are caused by throttle actuator or accelerator pedal position sensor faults.
January 13th, 2017, 10:27 AM
#3
CF Beginner
Thread Starter
Join Date: Apr 2014
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I have not had a code read yet, will not run long enough to get it someplace, but soon as I do I will post it. I am new to posting here so what do you mean by link the forum article? Thank You for the reply!!