Hooking up msd 6aln and blaster 3 to chevy citation
#1
Hooking up msd 6aln and blaster 3 to chevy citation
I got an 80' model chevy citation 2.5L and had a little running problem so i decided to try out the msd. The thing is i'm only familiar to japanese cars. Since it is an old chevy i figured it would be too hard to figure out but this is no ordinary chevy. I have no diagrams or nothing on paper so this is all speculation. The + wire from the battery goes directly to the stock coil and 2 wires (one that spilts in two) go of the + terminal on the coil (all red) and another red wire connects to a smaller terminal on the coil... and that's it, and i don't quite get it. These red wires of the + must be connected to the fuse box. But i know the +, but where is the -, the switch wire and where is the trigger?
Thread
Thread Starter
Forum
Replies
Last Post
flrtrader
Silverado & Fullsize Pick-ups
5
November 18th, 2011 5:28 PM
Dustin98ChevyBlazer
S-10 & Blazer
4
October 6th, 2010 2:23 AM
selbo
Silverado & Fullsize Pick-ups
0
January 5th, 2010 7:06 PM