fiberglass cap brake light hookup
#1
CF Beginner
Thread Starter
Join Date: Aug 2007
Location:
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
fiberglass cap brake light hookup
good morning
i recently got a used cap for my 95 s10. the guy who had it before mt clipped the wires off the back of the third brake light. i got the two wires reinstalled but before i went splicing into a tail light i want to see if anyone knew how to do this. the light has three bulbs in it. i am not sure if they are all for the brakes or if one is for each turn signal and middle one is for the brakes. if anyone has an idea please let me know
here is a link to what the light looks like
http://www.entirelyautoparts.com/jcw...AKE-LIGHT.html
i recently got a used cap for my 95 s10. the guy who had it before mt clipped the wires off the back of the third brake light. i got the two wires reinstalled but before i went splicing into a tail light i want to see if anyone knew how to do this. the light has three bulbs in it. i am not sure if they are all for the brakes or if one is for each turn signal and middle one is for the brakes. if anyone has an idea please let me know
here is a link to what the light looks like
http://www.entirelyautoparts.com/jcw...AKE-LIGHT.html
#3
CF Beginner
Thread Starter
Join Date: Aug 2007
Location:
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: fiberglass cap brake light hookup
ok thanks for the reply, i almost forgot i posted on here until i was driving home from work and i kept seeing the wires flopping around in my mirror.
Thread
Thread Starter
Forum
Replies
Last Post