I just bought a 1937 Chevy pick-up with a 1956 235 in it. It was driven on the trailer. When I received it, I started it after it was rolled off the trailer. It ran for a couple of minutes and died. Now it won't restart. I have checked the timing, replaced the points, plugs and condensor. Cap and rotor are good. I checked to see if the valves were sticking, all OK. I checked to see if the float was sticking, also OK.It won't start and backfires thru the carb. It won't even start with gas poured in the carb. Any suggestions?
Register today for free or log-in if already registered to remove this ad!