1976 C10 Tennessee Traveler
July 10th, 2016, 9:48 PM
#1
CF Beginner
Thread Starter
Join Date: Jul 2016
Location: Greater Detroit, Michigan
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
1976 C10 Tennessee Traveler
I recently purchased a 1976 C10 Silverado Tennessee Traveler. I am unable to find any specific information on this edition, if thats what it is. I'd also love to know any quirks about this year of C10 as well! Any and all information will be much appreciated!
September 11th, 2016, 3:20 PM
#2
CF Beginner
Join Date: Sep 2016
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I have a 1976 c10 I'm building a motor for its a good wrench 350 crate motor rated for 250 horse I had the crank shaved 20 on the rods 10 on the mains with a set of 416 casting 305 heads 58cc with screw in studs and comp pushrod guide plates chamber (ported and polished) with sealed power 4vr pistons (-6cc) also have a lunati .262/.268 can and lifter kit with a comp cams double roller riming chain and gear with a set of procomp roller rockers and mellimgs oil pump and all new bearings and seals and hastings chrome molly rings, possible going with a decent set of headers and forged rods) I was wondering what a ball park estimate of the power I will be making would be, if anyone can tell me (probably running a gm aluminum intake and the stock quadrajet) may go to demon blow thru or fast efi with a low boost turbo kit later on.
Last edited by Austinc10727; September 11th, 2016 at 3:23 PM.
