shift problems
April 26th, 2011, 6:41 PM
#1
CF Beginner
Thread Starter
Join Date: Apr 2011
Location: Fallon Nevada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
shift problems
My S10 has the 4L60E trans. On cold starts it initially hits 1 2 3 shifts no 4, if I come to a stop. It don't down shift. I can manualy pull it down. When the operating temp. comes up, If I pull off the road aand shut down and wait a few minutes, (reset the computer) It shifts like advertised with a check eng. light. I can stop go and all gears are there. If I park it for 5 to 15 minutes it shifts fine and check eng. light goes out. I scanned it and faulty 2-3 shift solinoid is all that sets. I have replaced it, and the oil and filter. There wasn't any debris in the pan and the oil I removed looked new. All the wirering looks fine. I'm thinking computer. Any help ???
What year S-10 and what DTC was that "faulty 2-3 shift solinoid," please.
April 30th, 2011, 10:30 AM
#5
CF Beginner
Thread Starter
Join Date: Apr 2011
Location: Fallon Nevada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I don't remember the No.'s that came up on the scanner. It's been a while. I'm sorry I don't understand the lettering thing, I can't do text messaging either.
Thread
Thread Starter
Forum
Replies
Last Post
mowglie
Tahoe & Suburban
0
September 23rd, 2014 4:20 AM
JR Sllim
Silverado & Fullsize Pick-ups
1
February 17th, 2012 3:32 PM
a_r_fowler
Silverado & Fullsize Pick-ups
0
September 7th, 2008 1:44 PM
