Notices
Silverado & Fullsize Pick-ups The Silverado has been one of the best selling trucks in the US for decades, and is truly proven to be "like a rock".

2014 Chevy Silverado
Platform: Truck, GMT 400, 800, & 900
Sponsored by:
Sponsored by: DashLynx
Old July 22nd, 2015, 1:30 PM
How-Tos on this Topic
Last edit by: IB Advertising
See related guides and technical advice from our community experts:

Browse all: Steering and Suspension
Print Wikipost

Anyone have suggestions on Helper Springs?

Thread Tools
 
Search this Thread
 
Old May 3rd, 2009, 5:58 PM
  #1  
CF Junior Member
Thread Starter
 
ActiveMonkey's Avatar
 
Join Date: Mar 2008
Location:
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
Default Anyone have suggestions on Helper Springs?

Long story short... i have a regular '04 Silverado 1500 but i regularly haul over 2000lbs and i can't stand the rear sagging anymore. I looked into getting 1500hd leaf springs from the dealer and junk yards, but they are really pricey and rather rare.

So i've been looking into helper springs and they look promising.

Here are some sets i have found.

Hellwig's LP-25 constant rate helper spring $203.39
http://store.summitracing.com/partde...5&autoview=sku

Hellwig's LP-25 progressive rate helper spring $202.69
http://store.summitracing.com/partde...5&autoview=sku

Does anyone know if they are any good?
What's the main difference between the constant rate and progressive rate springs?

Opinions and comments appreciated...
Old May 4th, 2009, 12:30 AM
  #2  
CF Junior Member
 
jwruss's Avatar
 
Join Date: Dec 2008
Posts: 91
Likes: 0
Received 0 Likes on 0 Posts
Default

If I were you, I'd look into an airbag kit. Easily installed, rated to 5000 lb. and very easy to air up when needed and when not needed an almost normal ride and suspension height. I personally use a set of Firestone bags on my 07 NBS. Can be found on Summit Racings web site or at firestone.com. About $260 shipped and normally bolt right in.

Much better than permanently stiffer springs.
Old May 4th, 2009, 10:22 AM
  #3  
CF Veteran
 
old dog's Avatar
 
Join Date: Dec 2007
Location:
Posts: 1,019
Likes: 0
Received 0 Likes on 0 Posts
Default helpers

hellwig does a good job on 87 and older truck's but they are a pain to get them to fit on the new body truck's because the springs are longer and don't clear the clip straps well and you have to trim them .i would suggest timbren load boosters (more bang for the buck) and no maintenance bolt them in and forget them .unless the truck has settled and lost ride height they don't come into play until the load is on it or you bottom out the truck . or air bag's from the ride aspect but they are more maintenance and cost .
Old May 4th, 2009, 11:15 AM
  #4  
Super Moderator
 
therewolf's Avatar
 
Join Date: May 2008
Posts: 2,476
Received 20 Likes on 19 Posts
Default

IMO, there's no substitute for adding OEM leafs from a set at the junkyard. Last time I checked, about 1/2 what you'd pay for the helper springs.

I've done both, and using additional leafs from an OEM set are more adjustable(you could add the whole set) and ride much better.

Jwruss's airbag idea sounds pretty good, too.
Old May 5th, 2009, 12:34 AM
  #5  
Super Moderator
 
suzuki-guy's Avatar
 
Join Date: Mar 2009
Location: Michigan
Posts: 1,636
Likes: 0
Received 2 Likes on 2 Posts
Default

yes air bags!!! Easier to install and about the same price, plus you can raise the rear end only when it needs it
Old May 5th, 2009, 8:28 AM
  #6  
CF Active Member
 
98white5.0's Avatar
 
Join Date: Jan 2009
Location: East Texas
Posts: 294
Likes: 0
Received 0 Likes on 0 Posts
Default

And if you want to go with low priced air bags, you can get the kind that you manually air up. You can go a little higher priced and get a compressor with them, or you can even get one with a sensor that turns on the compressor automatically. Just depends on what you are into. And, of course, how much you want to spend.
Old May 8th, 2009, 8:53 AM
  #7  
CF Beginner
 
Strutmastr's Avatar
 
Join Date: Dec 2008
Location: Roxboro, NC
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Honestly I would just go ahead and get a conversion kit. This will save you so much money in the long run. strutmasters.com has affordable conversion kits that convert you from air to powder coated, American made steel coil springs that are guaranteed to last the life of the car. I posted the link below so you can take a look.

http://www.strutmasters.com/chevrole...parts-s/81.htm

I hope this is of some help to you
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BigBlue05
Silverado & Fullsize Pick-ups
3
October 5th, 2012 11:02 PM
Burb
Tahoe & Suburban
10
November 23rd, 2011 5:29 PM
rosencra38
Tahoe & Suburban
0
September 24th, 2011 7:34 PM
country_09
Silverado & Fullsize Pick-ups
6
May 11th, 2010 2:46 PM
jeffscause
Silverado & Fullsize Pick-ups
1
July 29th, 2008 6:46 PM



Quick Reply: Anyone have suggestions on Helper Springs?



All times are GMT -5. The time now is 7:15 PM.