Walnuts??
December 31st, 2011, 1:43 PM
#1
CF Active Member
Thread Starter
Walnuts??
Well...First and foremost HAPPY NEWYEAR to everyone on the board.
I have replaced the intake gaskets on my 96 305 vortec at 230k. I used feltpro top of the line gaskets and torqued everything to factory specs. Now at 260k the intake is weeping from the opposite corner(right front). I don't want to do this over! I heard about a product from Caddy dealers called "Walnuts" that will seal a minimal coolant weep or leak and not damage or clog anything up. Does anyone have any personal experience with this product? Any feedback will be very helpful.
Thanks,
Charlie
I have replaced the intake gaskets on my 96 305 vortec at 230k. I used feltpro top of the line gaskets and torqued everything to factory specs. Now at 260k the intake is weeping from the opposite corner(right front). I don't want to do this over! I heard about a product from Caddy dealers called "Walnuts" that will seal a minimal coolant weep or leak and not damage or clog anything up. Does anyone have any personal experience with this product? Any feedback will be very helpful.
Thanks,
Charlie
January 7th, 2012, 12:54 PM
#2
CF Beginner
Join Date: Sep 2010
Location: Canton, TX
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Before you use that "Walnut" thing, try Bar's Leaks. It can be found at most automotive stores.
Here is their website; Bar's Leaks Products
Derl
Here is their website; Bar's Leaks Products
Derl