08 Chevy Uplander Calipers Won't Release
#1
CF Beginner
Thread Starter
Join Date: Feb 2014
Location: west virginia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
08 Chevy Uplander Calipers Won't Release
I have just replaced the calipers, rotors, brakes, hub assemby, and also axles. Now my calipers lock on all 4 wheels when you push the brakes. We have bled them over and over again including the lines under the hood. Don't wont to spend anymore more money unless it is needed. Need help no clue what else to do. I would appreciate any info anyone has.
#2
CF Active Member
Join Date: Jun 2012
Location: New Jersey
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Hi - I believe that you need the Tech2 tool to properly bleed the brakes on these especially since you opened up the brake lines and replaced the calipers and its likely that air got all the way back to the ABS unit.
Not like the old days with a piece of hose and a jar unfortunately.
Not like the old days with a piece of hose and a jar unfortunately.
Last edited by 442dude; March 1st, 2014 at 4:01 PM.
#3
CF Beginner
Hi - I believe that you need the Tech2 tool to properly bleed the brakes on these especially since you opened up the brake lines and replaced the calipers and its likely that air got all the way back to the ABS unit.
Not like the old days with a piece of hose and a jar unfortunately.
Not like the old days with a piece of hose and a jar unfortunately.
Thread
Thread Starter
Forum
Replies
Last Post
Chevrolet Forum News
News, Concepts, SEMA
0
December 3rd, 2014 9:38 AM
johntaps
OLD - Member Group & Special Buys
0
July 5th, 2012 6:59 AM
shooter12
OLD - PRIVATE For Sale / Trade Classifieds
0
May 2nd, 2012 5:27 PM
ConverseNation
Tahoe & Suburban
0
April 28th, 2012 1:55 PM